Description
TWIST Ball Only is a 1-inch ball that accepts TWIST mounting spuds and utilizes a variable friction 15mm clamp. With the variable friction design, you can grab and twist the attached spud without loosening a thumbscrew.
For a build-your-own TWIST Ball Arm, please check out this page. If you need to purchase extra Spuds, check out the Spud Page.
TWIST Ball components are compatible with our Universal Speedball and any other brand of 1-inch (25mm) ball attachment like Ultralight Control Systems, Wooden Camera, etc.
Choose your Spud:
-
No Spud
- A 15mm friction hole with no mounting spud
-
ARRI 1/4-20
- ARRI 1/4-20 with removable 3mm locating pins 10.4mm center to center
- Second set of holes for 3mm pins 15mm center to center
- Works with any cheese plate or accessory with ARRI standard 1/4-20 holes
- Works with Blackmagic Design PYXIS Monitor
- Works with recent SmallHD monitors like Indie 5, Cine 5, and Ultra 5
- Works with ARRI Camera Control Monitor CCM-1
-
ARRI 3/8-16
- ARRI 3/8-16 with removable 3mm locating pins 15mm center to center
- Works with any cheese plate or accessory with ARRI standard 3/8-16 holes
- Works with Atomos Shogun Ultra Monitor-Recorder (ATOMSHG002)
-
Canon C400, C300mkIII, C500mkII, LM-V2
- Works with Canon C400, C300mkIII, C500mkII, and LM-V2
-
ARRI M6 Rosette
- Works with Z CAM 2.89" EVF101
- Works with original PORTKEYS OEYE
-
Sony / PortKeys 1/4-20
- Attaches to any of the Sony cameras with Sony locating pins like Burano, FX6, and FX9
- Works with Sony Burano EVF Pivot Adapter
- Works with PORTKEYS LH7P (be careful, the monitor is plastic)
- Works with PORTKEYS 5” BM5 IV
-
L Bracket 1/4-20
- Includes the slotted L Bracket with two 1/4-20 screws
- Works with PORTKEYS LEYE III (note their HDMI cable may conflict with NATO rail in certain positions
- Works with original RED DSMC1 EVF
-
Female ARRI 1/4-20
- Works with any 1/4-20 product, including those with ARRI spaced locating pins (3mm diameter pin on 10.4mm spacing center to center)
-
Female ARRI 3/8-16
- Works with any 3/8-16 product, including those with ARRI spaced locating pins (3mm diameter pin on 15mm spacing center to center)
-
1/4-20 Rosette
- Works with 1/4-20 Rosette on the Kinefinity EAGLE SDI (or HDMI) e-Viewfinder
- Works with Zacuto Gratical, Gratical Eye, and Kameleon Pro EVF
- This is NOT a regular ARRI rosette
- Works with 1/4-20 Rosette on the Kinefinity EAGLE SDI (or HDMI) e-Viewfinder
-
Old-Style SmallHD 1/4-20
- Older style SmallHD 1/4-20 with wide locating tabs
- Works with legacy 5" SmallHD monitors like 501, 502, Focus 5, Focus Bolt, Action 5
- Works with legacy 7" SmallHD monitors like 701, 702, Focus 7, Indie 7, Cine 7
-
ARRI Viewfinder Wedge
- Works with ARRI standard EVF wedge products like EVF-1, EVF-2, MVF-1, MVF-2
- Works with other ARRI wedge adapters like ARRI VFA-4, K2.0015520, etc.
- Works with 3rd party products that utilize ARRI-style mounting wedges.
-
Blackmagic Viewfinder Wedge
- Includes the NATO rail, Knuckle, and spud for Blackmagic Design dovetail wedges
- Works with URSA Cine EVF - CINEURSAB/EVF
- Works with URSA Cine EVF Extension - CINEURSAB/EVFEXT
- Works with PYXIS Monitor Kit - CINEURSABB/AMKIT
-
Action Cameras (GoPro‚ DJI Osmo Action‚ Insta360)
- Standard receptacle for 2-prong action camera feet
- Works with GoPro, DJI Osmo Action, Insta360
- Works with many other 3rd party action camera products
-
Sony FX6
- Attaches to the FX6 monitor to provide a rigid "flop stop" mount
- Monitor folding capability is maintained
-
Male Hot Shoe
- Clamps to standard camera shoe mounts
-
Female Hot Shoe
- Female shoe receptacle for standard shoe accessories
-
NATO Rail
- Standard NATO rail with safety pins on each end
- Mounting area between pins is 30mm
-
NATO Clamp
- Standard NATO clamp with ratcheting thumbscrew
- Clamping area between outside edges 21mm
-
Tripod Expansion Adapter
- Includes a 5mm locating pin and 1/4-20 screw for attaching small cameras with a standard "tripod" mount
- Remove the locating pin and screw this adapter into any two 1/4-20 threaded holes between 16.5 and 33mm center to center
- Threaded ARRI 1/4-20 and 3/8-16 holes also available